Plimpton Innovations Plimpton Innovations
Cart 0
ACC5XY Dual-Axis Accelerometer, three-quarter view of the back plate and connector
Motion Sensors

ACC5XY Dual-Axis Accelerometer

Every unit ships with its own Certificate of Calibration: serial, calibration date, supply, measured low / high / center and sensitivity per output, calibration method and conditions.

$249.99

Datasheet and installation

Axes
Dual-axis
Outputs
Raw outputs alongside the filtered ones
Calibration
Its own Certificate of Calibration

An acceleration channel is as accurate as its scaling. A logger set up with generic values is scaled to a generic sensor, not to the unit in the car.

Integration

ACC5XY measures acceleration on two axes and delivers it as analog outputs to the data logger or ECU.

New ACC5XY hardware adds raw outputs alongside the filtered ones, for a wider range of applications.

Compatibility

Works with any ECU or data logger that has an analog input configurable for a 0-5 V linear sensor.

Verified with:

  • Holley HP
  • Holley Dominator
  • Haltech Elite Series
  • Haltech Nexus Series
  • FuelTech FT600
  • FuelTech FT700
  • MoTeC
  • MaxxECU
  • Emtron

Using a data logger? Check its manual for the analog input range and whether an adapter or expansion module is required.

Built and Proven

Whether your equipment takes the end points (the measured low and high) or the center and sensitivity, the values come from that exact unit, so the channels can be correctly scaled.

  • Every unit is individually calibrated and tested before it ships.
  • Specified, analyzed, verified, validated. Every product follows the same documented path, from functional requirements and failure analysis to verification and validation.
Certificate of CalibrationPhoto slot: a real photo of the certificate, values blurred
ACC5XY: ExplodedRender pending

Specifications

Range, supply and output details are published in the datasheet.

Axes
Dual-axis
Outputs
Raw outputs alongside the filtered ones
Range
In the datasheet
Supply
In the datasheet
Enclosure
56.11 x 38.92 x 12.7 mm; two #10-32 UNF threaded inserts on 45.72 mm centers

In the Box

  • Pigtail harness: sensor pre-terminated, approx. 18 in (460 mm) lead
  • Mating connector kit: connector, crimp terminals and terminal lock
  • Flat-panel mounting hardware: fasteners and lock washers
  • Certificate of Calibration, tied to its serial number
  • QR code to the product's documentation page
Card, 85.60 x 53.98 mm Enclosure, 56.11 x 38.92 mm
Shown to scale beside a standard bank card. Enclosure 56.11 x 38.92 x 12.7 mm.

Documentation

Also at /docs/acc5xy, the page the QR code supplied in the box opens.

  • ACC5XY datasheet and installation instructions. The list loads from the document register.