ECU Compatibility

Haltech

Weather station sensors and a G-meter for Haltech Elite and Nexus series. Log air temperature, barometric pressure, dew point and air density with every pass, alongside the rest of your Haltech data.

WSCAN on Haltech: CAN

Connect it to a supported ECU's CAN bus and it recognizes the ECU and configures itself, with no programming or firmware changes on the sensor.

Recognized automatically: Haltech Elite and Nexus series.

ECU-side setup is done in the ECU's own software, following that ECU's application note.

WSCAN application notes and DBC files are available to customers on request.

WSCAN Request WSCAN documents

WSANA on Haltech: 0-5 V analog

WSANA delivers up to four atmospheric conditions, measured or calculated, to the ECU, data logger or PDM as calibrated 0-5 V analog channels.

Verified with Haltech Elite Series and Haltech Nexus Series.

WSANA WSANA documentation

ACC5XY on Haltech: G-meter

ACC5XY Dual-Axis Accelerometer (G-Meter) with filtered and raw outputs. Verified with Haltech Elite Series and Haltech Nexus Series. Every unit ships with its own Certificate of Calibration.

ACC5XY ACC5XY documentation

Questions

How do I get humidity, water grains and density altitude into my Haltech?

A handheld meter or trailer station gives the number to a person. Mounted on the car, WSCAN or WSANA puts those conditions into the Haltech as sensor channels, logged with the rest of the run: WSCAN over CAN, recognized automatically on Haltech Elite and Nexus series; WSANA as 0-5 V analog channels on any analog input configurable for a 0-5 V linear sensor.

Does WSCAN work with Haltech?

Yes. Recognized automatically: Haltech Elite and Nexus series. ECU-side setup is done in the ECU's own software, following that ECU's application note.

Do I need to program WSCAN for Haltech?

Not on supported ECUs. Connect it to a supported ECU's CAN bus and it recognizes the ECU and configures itself, with no programming or firmware changes on the sensor.

Have WSANA and ACC5XY been set up on Haltech?

Yes. Both work with any ECU or data logger that has an analog input configurable for a 0-5 V linear sensor, and both are verified with Haltech Elite Series and Haltech Nexus Series.

Analog or CAN: which do I need?

Analog channels or CAN channels: choose the interface that matches the car. WSANA delivers up to four atmospheric conditions, measured or calculated, as calibrated 0-5 V analog channels. WSCAN delivers atmospheric conditions, measured or calculated, as CAN channels for supported ECUs.

Does every unit ship with a calibration record?

Every unit ships with its own calibration record, tied to its serial number.

All ECUs