Includes - All parts necessary to wire install the LED Strip Light -
(1) 12" LED Strip, Adhesive backed, Preterminated with 2 Cavity ATM/DTM Socket Plug
(1) 2 Cavity ATM/DTM Pin Receptacle (Mating Connector Body)
(1) 2 Cavity Pin Wedgelock
(2) Size 20 (20-22awg) Machined Pin, Nickel Plated
 
 
Compatable with 12V or 16V system, these low power, bright, and waterproof strip lights function great as dome lights or work lightshave a small footprint provides great brightness.
 
*On solid engine mounted racing applications, vibration MAY cause adhesive to delaminate if the wiring is not well secured/supported. For the BEST mounting results we found the simple addition of zip ties to secure ends or using a small amount of gasket maker (Silicone or Rightstuff) to assist in securing the light strip in place.
 
HOW WE INSTALL:
Clean the desired mounting surface with wax and grease remover
Remove the adhesive stip protection and firmly press LED Stip into your desired location
Use roughly 12" of 1/4" masking tape to cover the light strip face
Mask around the perimeter of the LED Strip Light leaving roughly 3/16" gap on all sides
Prepare the gasket maker (We use RightStuff) and apply a small amount every 1" or so around perimeter between Strip Light and Masking tape
With clean hands, spread gasket maker along edges (Apply more as needed)
After 5-10 minutes (while gasket maker is tacky) carefully remove the masking tape around perimeter, leaving the masking tape covering the LED's for last - be sure not to disturb/wipe adhesive